View GSPW1651NSE-20Y-TR_8723874.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

gspw1651nse - 20y - tr silicone package type outer dimension 4.6 x 4.6 x 0.67mm ( l x w x h ) package product features recommended applications ? moisture sensitive level :equivalent to 1 ? e fficiency 81lm/w @350ma ? white color emitting led (color temperature 2,000k) ? general color rendering index ra85 ? low thermal resistance product 9 /w ? lead - free soldering compatible ? rohs compliant standard product reference sheet ? outdoor lighting road lighting, tunnel lighting, etc. ? indoor lighting facility lighting (museum etc.) , home lighting, store lighting, other general lighting, etc. features page : 1 2016.1.28
gspw1651nse - 20y - tr outline dimensions unit mm weight 28.5mg tolerance 0.1 inside circuit recommended soldering pattern unit mm page : 2 2016.1.28 no. part name material qty. led die ingan 6 protection diode si 1 encapsulant silicone resin 1 lamp housing silicone resin 1 electrode ag plating 2 solder resist resin 1
gspw1651nse - 20y - tr specifications product overview die material ingan emitting color white resin color emitting area diffused pale orange lamp housing color white anode cathode page : 3 2016.1.28 notes 2 /w absolute maximum ratings 260 ma/ soldering temperature "reflow soldering" - 9 - 1,000 please refer to page 9, soldering conditions. noted 4 notes 3 min. typ. max. thermal characteristics notes 3 symbol r th(j-s) item thermal resistance junction - solder point notes 4 v units notes 1 -30 +100 forward current item symbol maximum ratings units mw 2,310 storage temperature i f 600 ma i r 85 ma i f derate linearly from "ts=90 " 20 t stg operating temperature t opr -30 +85 notes 2 notes 2 the range of operating and storage temperature is not taping condition. notes 3 esd testing methode : eiaj4701/300(304) hbm 1.5k ? , 100pf notes 1 junction - solder point (measurement point) power dissipation p d allowable reverse current t sld i f electrostatic discharge threshold "hbm" esd
gspw1651nse - 20y - tr specifications page : 4 2016.1.28 notes 6,8 please refer to the attached sheets, each sorting chart. chromaticity coordinates ra lm lm notes 10 viewing angle at 50% i v, ?x, y, as shown in the righ tside figure. half intensity angle i f = 350ma deg. 115 color temperature - - - notes 9 chromaticity coordinates : x and y according to cie1931. item symbol conditions i f = 350ma v r v notes 5 please do not input reverse voltage for prevent the destruction by static electricity. efficiency units i r = 10ma 1.1 electro-optical characteristics typ. v max. 3.00 luminous flux 85 U reverse voltage luminous flux 85 min. - v f 3.50 (ts=25 ) i f = 350ma - v - 0.527 lm/w i f = 350ma 73 - 100 - 85 k 60 i f = 350ma - 0.413 i f = 350ma 2,000 115 i f = 350ma - - - - - - y 81 - notes 7 luminous flux at 85 (junction temperature) 2.75 0.6 general color rendering index i f = 350ma ?y forward voltage - v notes 10 notes 8,9 notes 7 notes 6 notes 5 x i f = 350ma - - ?x c 3.25 60 min. min. a ma max. max. luminous flux v (lm) forward voltage v f (v) i f = 350ma 100 rank condition 80 mb b 3.00 3.25 ts=25 ta=25 3.00 80 2.75 sorting chart for luminous flux (v) and forward voltage v f (v) 3.50 i f = 350ma leds shall be sorted out into the following chart and each rank parts shall be pscked separately when shipping. rank condition notes tolerance 10 notes tolerance 0.1v
gspw1651nse - 20y - tr sorting chart for chromaticity coordinates specifications chromaticity coordinates shall be sorted out into the following chart and each rank parts shall be packed separately when shipping . page : 5 planckian locus (bbl ) 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.49 0.50 0.51 0.52 0.53 0.54 0.55 0.56 0.57 20 2016.1.28 0.3920 x 0.5326 0.5620 0.5189 0.4929 notes tolerance : 0.01 general color temperature 2,000k rank (ts=25 i f =350ma) y 0.3969 0.4345 0.4300 20
gspw1651nse - 20y - tr 0.0 0.2 0.4 0.6 0.8 1.0 1.2 380 430 480 530 580 630 680 730 780 spectral distribution condition: ts = 25 , i f = 350ma wavelength: (nm ) 0 50 100 100 50 0 50 100 - 30 - 60 60 30 0 90 spatial distribution condition : ts = 25 , i f = 350ma relative radiant intensity: (%) relative intensity technical data x direction y direction page : 6 2016.1.28
gspw1651nse - 20y - tr 2.5 3.0 3.5 -40 -20 0 20 40 60 80 100 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 -40 -20 0 20 40 60 80 100 0.0 0.5 1.0 1.5 2.0 0 100 200 300 400 500 600 10 100 1,000 2.50 2.75 3.00 3.25 3.50 solder point temp. vs. relative flux condition: i f = 350ma solder point temp .: ts ( ) forward voltage vs. forward current condition : ts = 25 forward voltage: v f ( v) solder point temp. vs. forward voltage condition : i f = 350ma solder point temp.: ts ( ) forward current vs. relative flux condition: ts = 25 forward current: i f ( ma) forward current: i f (ma ) relative flux relative flux forward voltage : v f (v) technical data page : 7 2016.1.28
gspw1651nse - 20y - tr 0 100 200 300 400 500 600 700 0 20 40 60 80 100 120 0.400 0.410 0.420 0.515 0.525 0.535 0.411 0.412 0.413 0.414 0.415 0.525 0.526 0.527 0.528 0.529 0.380 0.415 0.450 0.49 0.51 0.53 0.55 0.57 solder point temp. vs. max. forward current solder point temp. vs. chromaticity condition : i f = 350ma technical data solder point temp.: ts ( ) max. forward current : i f (ma) x y x y page : 8 0.380 0.415 0.450 0.49 0.51 0.53 0.55 0.57 forward current vs. chromaticity condition: ts = 25 100ma 2 00ma 350ma 500ma 6 00ma 85 25 60 0 - 30 2016.1.28
gspw1651nse - 20y - tr soldering condition 1. heat stress during soldering will influence the reliability of leds, however that effect will vary on heating method. also, if components of varying shape are soldered together, it is recommended to set the soldering pad temperature according to the component most vulnerable to heat (e.g., surface mount led). 2. led parts including the resin are not stable immediately after soldering ( when they are not at room temperature), any mechanical stress may cause damage to the product. please avoid such stress after soldering, especially stacking of the boards which may cause the boards to warp and any other types of friction with hard materials . 3. recommended temperature profile for the reflow soldering is listed as the temperature of the resin surface. temperature distribution varies on heating method, pcb material, other components in the assembly, and mounting density . please do not repeat the heating process in reflow process more than twice. note 1 temperature profile for the reflow should be set to the surface temperature of resin which is on the top of led. this should be the maximum temperature for soldering. lowering the heating temperature and decreasing heating time is very effective in achieving higher reliability . note 2 the reflow soldering process should be done up to twice(2 times max). when second process is performed, interval between first and second process should be as short as possible to prevent absorption of moisture to resin of led. the second soldering process should not be done until leds have returned to room temperature (by nature - cooling) after first soldering process. soldering precaution ( acc.to eiaj - 4701/300 ) page : 9 2016.1.28 recommended reflow soldering condition 40sec max. 150 180 +1.5 +5 /s 260 max. - 1.5 - 5 /s 120sec max. pre - heating (soldering 230 max. peak temperature
gspw1651nse - 20y - tr soldering condition 4. if soldering manually, stanley recommends using a soldering iron equipped with temperature control. during the actual soldering process , make sure that the soldering iron never touches the led itself, and avoid the led's electrode heating temperature reaching above the heating temperature of the solder pad. all repairs must be performed only once in the same spot, and please avoid reusing components. 5. in soldering process, immediately after iron tip is cleaned, please make sure that the soldering iron reaches the appropriate temperature before using. also, please avoid applying any types of pressure to the soldered components before the solder has been cooled and hardened, as it may deteriorate solder performance and solder quality. 6. when using adhesive material for tentative fixatives, thermosetting resin or ultraviolet radiation (uv) setting resin with heat shall be recommended. the curing condition, temperature:150 max./ time:300sec.max. 7. flow soldering (dip soldering) is not recommended for this product. 8. isopropyl alcohol is recommended for cleaning. some chemicals, including freon substitute detergent could corrode the lens or the casing surface, which cause discoloration, cloud, crack and so on. please review the reference chart below for cleaning. if water is used to clean (including the final cleaning process ), please use pure water (not tap water), and completely dry the component. cleaning with ultrasonic is not recommended. recommended manual soldering condition temperature of iron tip 350 max. soldering duration, time 3sec.max.,1 time chemical adaptability ethyl alcohol isopropyl alcohol pure water trichloroethylene chlorothene acetone thinner page : 10 2016.1.28
gspw1651nse - 20y - tr handling precaution this type of led lamp is highly sensitive to surge voltage generated by the on/off status change and discharges of static electricity through frictions with synthetic materials, which may cause severe damage to the die or undermine its reliability. damaged products may experience conditions such as extremely high reverse voltage, or a decrease of forward rise voltage, deteriorating its optical characteristic. stanley products are designed to withstand up to 1,000v under the eiaj ed - 4701/300 test ? 304 (hbm), and are packed with anti - static components. however, the following precautions and measures are vital in ensuring product quality during shipment. eiaj ed - 4701/300 304/hbm electrification model: c=100pf, r2=1.5k do not place electrified non - conductive materials near the led product. avoid led products from coming into contact with metallic materials.( should the metallic material be electrified , the sudden surge voltage will most likely damage the product .) avoid a working process which may cause the led product to rub against other materials . install ground wires for any equipment, where they can be installed, with measures to avoid static electricity surges . prepare a esd protective area by placing a conductive mattress (1m max.) and ionizer to remove any static electricity. operators should wear a protective wrist - strap. operators should wear conductive work - clothes and shoes. to handle the products directly, stanley recommends the use of ceramic, and not metallic, tweezers. 2. working environment a dry environment is more likely to cause static electricity. although a dry environment is ideal for storage state of led products, stanley recommends an environment with approximately 50% humidity after the soldering process. recommended static electricity level in the working environment is 150v, which is the same value as integrated circuits (which are sensitive to static electricity). for electric static discharge ( esd ) 1. electrification/static electricity protection stanley recommends the following precautions in order to avoid product (die) damage from static electricity , when an operator and other materials electrified by friction coming in contact with the product. page : 11 2016.1.28
gspw1651nse - 20y - tr handling precaution other precautions 1. stanley led lamps have semiconductor characteristics and are designed to ensure high reliability. however, the performance may vary depending on usage conditions. 2. absolute maximum ratings are set to prevent led lamps from failing due to excess stress( temperature, current, voltage, etc.). usage conditions must not exceed the ratings for a moment, nor do reach one item of absolute maximum ratings simultaneously. 3. in order to ensure high reliability from led lamps, variable factors that arise in actual usage conditions should be taken it to account for designing. ( derating of typ., max forward voltage, etc.) 4. please insert straight protective resistors into the circuit in order to stabilize led operation and to prevent the device from igniting due to excess current . 5. this type of product is not water proof and moisture proof nor with salt corrosion protection , therefore attention should be paid when products are used under such conditions. 6. please avoid the stick of foreign material because molding resin in the products have adhesiveness . 7. please check the actual performance in the assembly because the specification sheets are described for led device only. 8. please refrain from looking directly at the light source of led at high output, as it may harm your vision. 9. the products are designed to operate without failure in recommended usage conditions. however , please take the necessary precautions to prevent fire, injury, and other damages should any malfunction or failure arise. 10. when there is a process of supersonic wave welding etc. after mounting the product, there is a possibility of affecting on the reliability of junction part in package (junction part of die bonding and wire bonding). please make sure there is no problem before using. 11. please avoid overload to the product when using tweezers to pick up leds . overload might cause deformation, disconnection, crap and consequently lead to lighting failure tweezers with flat tips is recommended, please avoid using tweezers with sharp tips. 12. low hardness resin is used on the bottom of lens. please avoid overload to the surface of lens which might cause wire disconnection and breakage. be careful when dealing with the products and pay attention to following points. ? during mounting process, keep lens from coming in contact with adsorbing nozzle and refer to precautions on next page. ? pay attention to the storage of leds even after mounting, because overload caused by stacking pcbs and shock. ? in the processes of water pressure during cleaning, air pressure, drying and other processes after mounting , overload to lends should be avoided. 13. the products are manufactured to be used for ordinary electronic equipment. please contact our sales staff beforehand when exceptional quality and reliability are required, and the failure or malfunction of the products might directly jeopardize life or health ( such as for airplanes, aerospace, transport equipment , medical applications, nuclear reactor control systems and so on). 14. the formal specification sheets shall be valid only by exchange of documents signed by both parties. page : 12 2016.1.28
gspw1651nse - 20y - tr recommendation handling precaution handling precautions for product mounting picking up point with nozzle : lamp housing of the product ( area ) ( shown below ) the pick up point is lamp housing only because the silicone resin used for the lens is soft. (if the nozzle makes contact with the lens, the products might be destroyed) lens has a concave surface. picking up point (lamp housing) non allowed picking up area ( lens) please adjust the load, the pick up point, the nozzle diameter and etc. before mounting because the over load can cause the breakage of the lamp housing. load : less than 10n (to avoid the product breaking) page : 13 2016.1.28
gspw1651nse - 20y - tr packaging specifications this product is baked (moisture removal) before packaging, and is shipped in moisture - proof packaging (as shown below) to minimize moisture absorption during transportation and storage. however, with regard to storing the products, stanley recommends the use of dry - box under the following conditions is recommended. moisture - proof bag as the packaging is made of anti - static material but packaging box is not. if any led remain unused, please put it back to moisture - proof bag, reseal the package and store it under the conditions described in the recommended storage condition . when over 6 months passed after first opening of package, please do confirm the solder wettability of the terminals. baking (moisture removal) is not needed for this product . please do not bake leds with carrier tape. time elapsed after package opening in the case of the package unopened , 6 months under recommended storage condition . please avoid rapid transition from low temp. condition to high temp. condition and storage in corroding and dusty environment. recommended storage condition / products warranty period temperature +5 30 humidity under 70% page : 14 2016.1.28
gspw1651nse - 20y - tr moisture - proof packaging specification fastener for re - storage after opening bag customer's opening position product label heat sealing position (after product being put in) (desiccant with indicator for moisture level is enclosed .) 1 a packaging specifications page : 15 2016.1.28 no. part name matelrial remarks moisture-proof bag with aluminum layer pet+al+pe with esd protection
gspw1651nse - 20y - tr packing box ( rohs ? elv compliant ) the above measure is all the reference value. shipping box is selected out of the above table by shipping quantity. packaging specifications box type outline dimension l w h (mm) capacity of the box type a 280 265 45 3 reels type b 310 235 265 15 reels type c 440 310 265 30 reels b type a material / box cardboard c5bf type b,c material / box cardboard k5af partition cardboard k5af page : 16 2016.1.28 no. part name matelrial remarks packing box corrugated cardboard without esd protection
gspw1651nse - 20y - tr label specification ( acc.to jis - x0503(code - 39 )) product label a. parts number b. bar - code for parts number c . parts code (in - house identification code for each parts number) d. packed parts quantity e. bar - code for packed parts quantity f. lot number & rank ( refer to lot number notational system for details ) g . bar - code for lot number & rank opto device l abel a. customer name b. parts type c. parts code d. parts number e. packed parts quantity f. carton number g. shipping date h. bar - code for in - house identification number bar - code font : acc.to code - 39(jix0503) packaging specifications b a page : 17 2016.1.28
gspw1651nse - 20y - tr taping and reel specifications ( acc.to jis - c0806 - 03 appearance note " - tr" means cathode side of leds should be placed on the sprocket - hole side. items specifications remarks leader area cover - tape cover - tape shall be longer than 320mm without carrier - tape the end of cover - tape shall be held with adhesive tape. carrier - tape empty pocket shall be more than 13(100mm) pieces. please refer to the above figure for taping & reel orientation . trailer area empty pocket shall be more than 20(160mm) pieces. the end of taping shall be inserted into a slit of the hub. page : 18 2016.1.28
gspw1651nse - 20y - tr taping and reel specifications (acc.to jis - c0806 - 03 qty. per reel mechanical strength others 2 ,000parts/reel minimum qty. per reel might be 500 parts when getting less than 2 ,000 parts. in such case, parts of 500 - unit - qty. s hall be packed in a reel and the qty. shall be identified on the label. cover - tape adhesive strength shall be 0.1 1.3n ( an angle between carrier - tape and cover - tape shall be170 deg. ). both tapes shall be so sealed that the contained parts will not come out from the tape when it is bent at a radius of 15mm. reversed - orientation, up - side down placing, side placing and out of spec. parts mix shall not be held. max qty. of empty pocket per reel shall be defined as follows . max, qty. of empty pocket per reel shall be defined as follows. page : 19 2016.1.28 1,500 - 500 1 1,000 remarks max.qty. of empty pocket - no continuance 1 - 1 2 2,000 qty./reel
gspw1651nse - 20y - tr taping dimensions reel dimensions taping and reel specifications (acc.to jis - c0806 - 03 unit mm page : 20 2016.1.28
gspw1651nse - 20y - tr lot number notational system - 1digit production location (mark identify alphabet) - 1digit production year (last digit of production year 20099,20100,20111, ??? ) - 2digits production month (jan. to sep. should be 01,02,03, ????? ) - 2digits production date - 3digits serial number - 2digits tape and reel following number - 2digits luminous intensity rank. (if luminous intensity rank is 1 digit, " - " shall be dashed on the place for the second digit. if there is no identified intensity rank, " - - " is used to indicate .) page : 21 chromaticity rank (if chromaticity rank is 1 digit, " - " shall be dashed on the place for the second digit. if there is no identified intensity rank, " - - " is used to indicate .) - 2digits - 1digit v f rank (if there is no identified v f rank, " - " is used to indicate .) 2016.1.28
gspw1651nse - 20y - tr correspondence to rohs ? elv instruction this product is in compliance with rohs ? elv. prohibition substance and it's criteria value of rohs ? elv are as follows. ? rohs instruction refer to following (1) (6). ? elv instruction . refer to following (1) (4). substance group name criteria value (1) lead and its compounds 1,000ppm max (2) cadmium and its compounds 100ppm max (3) mercury and its compounds 1,000ppm max (4) hexavalent chromium 1,000ppm max (5) pbb 1,000ppm max (6) pbde 1,000ppm max page : 22 2016.1.28
gspw1651nse - 20y - tr reliability testing result 1. reliability testing result 2. failure criteria page : 23 2016.1.28 cosmetic appearance - - occurrence of notable decoloration, deformation and cracking luminous intensity i v i f =100ma testing min. value standard min. value 0.5 forward voltage v f i f =100ma testing max. value R standard max. value 1.2 item symbol conditions failure criteria 1,000h 1,000h eiaj ed-4701 /100(101) low temperature operating life 0 / 20 0 / 20 1,000h 0 / 20 1,000h eiaj ed-4701 /100(101) ta=60 90% i f =600ma 1,000h 0 / 20 1,000h eiaj ed-4701 /200(202) high temperature storage life ta=100 ta= -30 eiaj ed-4701 /200(201) electrostatic discharge (esd) eiaj ed-4701 /300(304) c=100pf r2=1.5k 2,000v 0 / 20 1,000 cycles low temperature storage life 0 / 20 test item wet high temperature operating life eiaj ed-4701 /100(102) duration test condition standard high temperature operating life room temperature operating life eiaj ed-4701 /100(101) ta=85 i f =600ma ta=25 i f =600ma ta= -40 i f =600ma 0 / 20 failure moisture soak 30 70% 168h preheating 150 180 120sec max. soldering 260 peak 0 / 20 2times 0 / 20 once of each polarity eiaj ed-4701 /300(301) resistance to reflow soldering thermal shock ta= -30 100 (each 15min) eiaj ed-4701 /100(105) reference test
gspw1651nse - 20y - tr special notice to customers using the products and technical information shown in this data sheet 1) the technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. it does not constitute the warranting of industrial property nor the granting of any license. 2) for the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. therefore it is recommended that the most updated specifications be used in your design. 3) when using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. we are not responsible for any damage which may occur if these specifications are exceeded. 4 ) the products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (oa equipment, telecommunications equipment, av machine, home appliance and measuring instrument). the application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except oa equipment, telecommunications equipment, av machine , home appliance and measuring instrument. 5) in order to export the products or technologies described in this data sheet which are under the foreign exchange and foreign trade control law, it is necessary to first obtain an export permit from the japanese government. 6) no part of this data sheet may be reprinted or reproduced without prior written permission from stanley electric co., ltd. 7) the most updated edition of this data sheet can be obtained from the address below: http:// www.stanley - components.com/en/ page : 24 2016.1.28

▲Up To Search▲

Price & Availability of GSPW1651NSE-20Y-TR

	To Download GSPW1651NSE-20Y-TR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .